Fire Basket Grill
TOOLS I USE
Casting Aluminum Wheels
In this video I cast some very deep dish casters that were originaly intended for my foundry.
Fire Basket Grill
I designed a fire basket for outdoors out of simple angle iron. I used an unconventional approach for laying out the pieces.
Custom Leather Wallet
I made a very simple leather wallet for myself. I think it turned out pretty nice!
Custom Pouring Tongs
When I started casting, I wanted an easy way to lift and pour the molten aluminum filled crucible. This is what I came up with!
cast brass sand rammer
For awhile I wanted to make a sand rammer for ramming up my sand molds. I have also wanted to try casting some brass!
DIY Metal Brake
I needed to bend some 16 guage steel for a project. I built this steel brake/bender out of steel angles.
50K Subscriber Plaque
This is the 50K Plaque I made to commemorate reaching 50,000 subscribers on YouTube!
rigid gravity clamps
These are rigid cast lead and steel weights for my shop. Ideal for holding down or gluing up!
flexible leather shop weights
These leather shot bags are great for gluing up or holding irregular shapes.
ikea hack | vÖrkbensh
In this video, I will modify the BEKVAM IKEA kitchen cart and add custom drawers to make it better suited to the shop.
design rhyme | vÄldbensh
Based on alterations I wanted to make to the IKEA stand, I designed a welding table to match.
cast aluminum box
Using a 3D printed pattern, I cast a fairly complicated part using sodium silicate sand.
cast aluminum drawer handles
In this video, I machine the pattern and cast some custom drawer handles I designed.
Cast dominoes | CNC match-plate
In this video, I machine a Corian matchplate for my own custom dominoes I designed.
Cast dominoes | sand molding
Sand molding and casting of my custom dominoes in molten aluminum.
10K plaque | CNC pattern
This subscriber plaque celebrates reaching 10,000 subscribers! I use a depth map to produce a 3D pattern in foam.
10K plaque | Cast and polish
This is the sand casting process for the 10k subscriber plaque. I will cast and polish the final piece.
Portaband saw stand
In this video, I will assemble the prototype for my portaband saw stand.
cnc drag knife
This is the Drag Knife I designed for the Platform CNC. It works great and plans can be found under 'Plans' above.
5k subscriber plaque
This was the very first cast I made using the FIRE~KEG! It is a plaque commemorating 5k Subs on YouTube
White Lake, Michigan 48386
(c) Grunblau Design Studio